Ръководство за избор на лубриканти
	American Polywater® Corporation offers many lubricants for a variety of applications. Which is best for you?

F	Polywater® Lubricant F is a high-performance, pourable liquid recommended for long, difficult, fiber optic cable pulls. It is slow drying and leaves a lubricating film after its water base evaporates. F does not stress crack low density polyethylene. It is compatible with all common* cable jackets.
WF	Polywater® Lubricant WF (winter grade) is Polywater® F specially formulated for use in temperatures as low as -20°F (-30°C).
FTTx	Polywater® Lubricant FTTx is a thin liquid for convenient lubrication when pushing or pulling small cables, using a spray or wipe application. Ideal for fiber drops in the Last Mile environment, and for Category 6 data cables susceptible to the "wet link" insertion loss phenomenon. It is compatible with all common* cable jackets.
J	Polywater® Lubricant J is a clean, slow-drying, water-based, high-performance gel. Lubricant J provides maximum tension reduction in all types of cable pulling. It is especially recommended for long pulls and pulls in a hot environment. Lube J dries to form a thin lubricating film that retains its slip for months after use. J is a specification-grade lubricant that does not promote flame propagation when used with fire-retardant cables and systems. It is harmless to humans, environmentally safe, compatible with all common* cable jacket materials, and can be easily applied as part of the unique Polywater® Lubricant Application System. Patented, UL- and CSA-listed Polywater® J is the premier lubricant in the Polywater® line.
WJ	Polywater® Lubricant WJ (winter grade) is Polywater® J specially formulated for use in temperatures as low as -20°F (-30°C).
PJ	Polywater® Lubricant PJ is a pourable version of the popular Polywater® J. PJ offers the same proven features as Lube J in such key areas as lubricity, cable compatibility, residue fire resistance, and ease of cleanup--yet is easier to apply where pouring is practical.
P	Prelube 2000™ Cable Blowing Lubricant is a high-performance, pourable liquid recommended for long, difficult, cable blowing. It is slow drying and leaves a lubricating film after its water base evaporates. It does not stress crack low density polyethylene. It is compatible with common* cable jackets.
PM	Prelube 5000™ Micro-Cable Blowing Lubricant is a high-performance, thin liquid recommended for long, difficult, microcable blowing. It is slow drying and leaves a lubricating film after its water base evaporates. It does not stress crack low density polyethylene. It is compatible with common* cable jackets.

*Contact KST Plus Ltd. or American Polywater® for specific recommendations on LSZH or LSHF cable jackets.

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, KST Plus Ltd. or American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.