Лубриканти за изтегляне на кабели

Polywater® J High Performance Cable Pulling Lubricant

Polywater® Lubricant J is a high performance, clean, slow-drying, water-based gel lubricant. Lubricant J provides maximum tension reduction in all types of cable pulling. It is especially recommended for long pulls, multiple-bend pulls and pulls in a hot environment. Lubricant J dries to form a thin lubricating film which retains its lubricity for months after use. Polywater® Lubricant J is a specification-grade lubricant that does not promote flame propagation when used with fire-retardant cables and systems. It is harmless to humans, environmentally safe, compatible with all common* cable jacket materials, and can be easily applied as part of the unique Polywater® Lubricant Application System. Polywater® Lubricant WJ (winter grade) has the same characteristics as Polywater® Lubricant J and is specially formulated for use in temperatures as low as -30°C (-20°F). Front End Pack™ is a conduit-sized polyethylene bag of lubricant. The Front End Pack™ travels through the conduit on the winch line prelubricating the conduit ahead of the cable being pulled.   Key Features Maximum Friction Reduction Clean and Non-Staining High Cling Factor Compatible With Common* Cables Application System Temperature Stable UL and CSA Listed Non-Combustible Residue Available in Cold Weather (Non-Freezing) Formula Available in Pourable (Liquid) Formula Specification Grade

Specifications Parameter Value Lubricity PVC or LDPE-jacketed cable on PVC conduit at 2.91 kN/m (200 lbs/ft) normal pressure; coefficient of dynamic fiction <.15 PVC or LDPE-jacketed cable on HDPE innerduct at 2.9 kN/m (200 lbs/ft) normal pressure; coefficient of dynamic friction <.15 Percent non-volatile solids 3.5 to 5.5% Appearance Thick, cream colored gel material Wax, grease and silicone content none Temperature use range -5°C to 60°C (20°F to 140°F) for Polywater® Lubricant J, -30°C to 60°C (-20°F to 140°F) for Polywater® Lubricant WJ (winter grade). pH 7.5 to 9.0 Cable compatibility No deleterious effects on physical or electrical properties of common* cable jackets. Polyethylene stress cracking No stress cracking on LDPE cable jacket when tested by ASTM D1693. Cling factor Twelve inches (30 cm) of a one-inch (2.5 cm) diameter cable will hold at least 75 grams of lubricant for one minute when held vertically (at 70°F/20°C). Temperature stability No more than 20% change in Brookfield viscosity from 5°C to 40°C (40°F to 100°F). No phase-out after five freeze/thaw cycles or 24-hour exposure at 50°C (120°F). Toxicity Non-toxic and non-sensitizing. Industrial use only. Cleanup Complete cleanup possible with water. Flammability Lubricant has no flash point and dried residue is non-flammable.

Package Size and Catalog Numbers Package Size Lubricant Units/Case J® WJ® 208L drum (55-gallon) J-Drum WJ-Drum 1 18.9L pail (5-gallon) J-640 WJ-640 1 3.8L jug (1-gallon) J-128 WJ-128 4 1.9L FEP™ in 18.9L pail (½-gal in 5-gal) J-110 WJ-110 10 0.95L FEP™ in 18.9L pail (1-quart in 5-gal) J-99 WJ-99 16 1.9L FEP™ in carton (½-gal) J-55 WJ-55 6 0.95L squeeze bottle (1-quart) J-35 WJ-35 12 0.95L FEP™ in carton (1-quart) J-27 WJ-27 12

*Polywater® J is NOT RECOMMENDED FOR LSZH or LSHF CABLES. Contact KST Plus Ltd. or American Polywater® for specific recommendations on "Low Smoke Zero Halogen" cable jacket types.

Important Notice: The statements and information here are made in good faith based on tests and observations we believe to be reliable. However, the completeness and accuracy of the information is not guaranteed. Before using, the end-user should conduct whatever evaluations are necessary to determine that the product is suitable for the intended use. The user assumes all risks and liability in connection with such use. The statements contained herein are made in lieu of all warranties, express or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose, which warranties are hereby expressly disclaimed. American Polywater's only obligation shall be to replace such quantity of the product proven to be defective. Except for the replacement remedy, KST Plus Ltd. or American Polywater shall not be liable for any loss, injury or damage, direct or indirect, arising from the use or the failure to properly use these products, regardless of the legal theory asserted. The foregoing may not be altered except by a written agreement by the officers of American Polywater Corporation.