Lubricants and Cleaners
Cable Pulling Lubricants
	The Polywater® F Fiber Optic and Other Communications Cable Pulling Lubricant is a high performance, pourable liquid lubricant recommended for long, difficult, lightguide cable pulls. It is slow drying and leaves a lubricating film after its waterbase has evaporated. Polywater® Lubricant F will not stress crack low density polyethylene. It is compatible with all common types of cable jackets.
	The Polywater® FTTx Fiber Drop Lubricant makes the installation of fiber drops easy. The lubricant is concentrated, only a thin film is required for immediate tension reduction that lasts even as the lubricant dries. Spray or wipe the cable or conduit. Quick and easy to use without mess or excess lubricant. Polywater® FTTx Spray Lubricant remains effective with very thin, molecular-level films, so it continues to lubricate even when it can not be detected.
	The Polywater® Lubricant J is a high performance, clean, slow-drying, water-based gel lubricant. Lubricant J provides maximum tension reduction in all types of cable pulling. It is especially recommended for long pulls, multiple-bend pulls and pulls in a hot environment. Lubricant J dries to form a thin lubricating film which retains its lubricity for months after use.