Fast Ethernet WDM Media Converter

10/100 Base-TX/FX Bridge Converter (single fiber)

Overview Converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly. This converter can be used as a standard alone unit or a slide-in module to fit the 19" converter rack. Key Features Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX; 10/100Mbps and full/half duplex automatically configure in TP port; MDI/MDI-X Auto Negotiation; LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL; FCC Class A & CE approved; Technical Specifications Standard protocol: IEEE802.3 10 Base-T standard IEEE 802.3u 100Base-TX/FX standard Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125single-mode TP Cable: Cat.5 UTP cable Connector: one UTP RJ-45, one SC Operation mode: full duplex or half duplex Maximum distance: 20km Power supply: 100 to 240VAC 50 to 60Hz Input power: 2A@+5v Dimensions: 70.5mm(L) x 94mm(W) x 26.5mm(H) Environment:      Relative humidity: 5% to 90%      Operating temperature: 0°C to 60°C      Storage temperature: -20°C to 70°C